When we are waiting at the station, we will see rows of waiting chairs, which provide us with a place to sit. From the appearance point of view, we also know that this waiting chair device should be relatively simple. But how simple? Interested friends can come and see the installation method and maintenance method of the waiting chair.

Waiting chair device-maintenance method of stainless steel waiting chairStains containing adhesive components on the surface can be scrubbed with alcohol and organic solvents. There are trademarks and films on the exterior, and they should be washed with warm water and weak detergent. If the surface is polluted by oil, grease and lubricating oil, it should be cleaned with a soft cloth, and then cleaned with ammonia solution, neutral detergent or special detergent.

　　Bleach and various acids are attached to the surface, immediately rinse with water, then soak with neutral carbonated soda solution, ammonia solution, or wash with warm water and neutral detergent. If there is dust or dirt that is easy to remove, you can use weak detergent, soap, warm water to wash the waiting seat device-installation steps, arrange the seat back plate regularly on the linen or paper.

　　Install the link with the beam at the corresponding place above the seat plate and fix it with screws. Adjust the position of the seat plate again, the screw holes on the beam should correspond to the holes of the link one by one, and fix them with screws. Install the stand feet, fasten the stand feet and the stand foot fasteners on the beam, and then fix them with screws.